联系我们
公司名称：XXX
电话：XXX
手机：XXX
联系人：XXX
地址：XXX
新闻动态
塑料检查井具体有4种结构，各有优势
对市场产品结构进行归纳，具体有4种结构，各有优势：
The product structure of the market is summed up, and there are 4 specific structures, each with advantages:
1、井座主体无筋，支管撑口有筋（第1种）
Well, 1 seat body unreinforced, branch opening bars (first)
特点：
Features:
（1）模具套模易实现，比单独一套模具生产成本相对低；
(1) die mold is easy to implement, lower than a single set of mold production cost;
（2）接管承口强度相对较好、井座椭圆度相对好控制；
(2) over the socket strength is relatively good, the well seat ovality relatively good control;
（3）井身强度相对差一些，对模具冷却要求高。
(3) well strength is relatively low, high requirements for mould cooling.
2、井座主体外表有筋，接管承口无筋（第2种）
Well, 2 seat main body the appearance of a band, took over the socket without reinforcement (second kinds)
特点：
Features:
（1）模具套模易实现，模具投入成本低；
(1) mold mold mold easy realization, low cost;
（2）井身强度相对较高，井筒承口椭圆度大；
(2) as well as relatively high strength, shaft socket ovality;
（3）缺点：接口承口椭圆度难控制，对模具冷却要求高。
(3) disadvantages: interface socket ellipticity is difficult to control, high requirements for mould cooling.
3、井座主体、接管承口都有筋（第3种）
, 3 wells over the socket base body, has a rib (third)
特点：
Features:
（1）井身、接管承口强度相对较好、椭圆度相对好控制；
(1), well over the socket strength is relatively good, relatively good control of ellipticity;
（2）缺点是模具套模实现困难，模具投入成本较高。
(2) is difficult to realize mold mold, mold high cost.
4、井座主体、接管承口都有筋，底部加筋（第4种）
Wells, 4 seat main body, nozzle socket has reinforced ribs, the bottom (fourth)
（1）底部加筋，能够提高落锤抗冲击能力；
(1) at the bottom of the reinforcement, can enhance the impact resistance of the hammer;
（2）产品表面加筋，能够提高荷载能力，易达到标准要求；
(2) surface reinforcement can improve the load capacity, access to standard requirements;
（3）承插口底部加筋，能够提高安装时与管材端口接平，生产时减少收缩。
(3) socket bottom reinforcement, can improve installation and pipe port connection flat, reduce shrinkage production.
（4）模具套模易实现，结构轻化，重量比同行减轻3%。
(4) mold mold structure is easy to realize, light weight, reduced 3% than their peers.
