检查井是用在建筑小区(居住区、公共建筑区、厂区等)范围内埋地塑料排水管道外径不大于800mm、埋设深度不大于6m,一般设在排水管道交汇处、转弯处、管径或坡度改变处、跌水处等,为了便于定期检查、清洁和疏通或下井操作检查用的塑料一体注塑而成或者砖砌成的井状构筑物。
The inspection well is a plastic integrated injection molding or brick
building used for regular inspection, cleaning and dredging or
inspection of downhole operation. The external diameter of the buried
plastic drainage pipe in the building area (residential area, public
building area, plant area, etc.) is not more than 800mm, and the buried
depth is not more than 6m. It is generally located at the intersection
of the drainage pipe, the turning, the change of pipe diameter or slope,
and the drop of water, etc A well shaped structure.
塑料一体注塑检查井是指构成检查井的主要井座部分采用一次性注塑成型,井筒插口采用360度环型承载平台,井身及井座底部采用网状加强筋,各承插口采用环型加强筋设计。根据接管数和角度不同有起始井座、直通井座、45度弯头井座、三通井座、四通
聚氨酯软管 PVC软管 隔离墩模具 u型槽模具 护坡模具 pvc输送带 尼龙输送带 天津除甲醛 北京除甲醛井座等。为了适应各种排水状况,塑料检查井同时配套有变径接头、汇流接头、井筒多接头等与之配套的塑料一体注塑成型配件。以保障整个排水系统的流畅和密封性。
The plastic integrated injection inspection well refers to the one-time
injection molding of the main well seats, the 360 degree ring bearing
platform is used for the shaft spigot, the mesh reinforcement is used
for the well body and the bottom of the well seat, and the ring
reinforcement design is used for each spigot. According to the number
and angle of connecting pipes, there are initial well seat, through well
seat, 45 degree elbow well seat, three-way well seat, four-way well
seat, etc. In order to adapt to various drainage conditions, the plastic
inspection well is equipped with variable diameter joint, confluence
joint, shaft multi joint and other plastic integrated injection molding
accessories. To ensure the smoothness and tightness of the whole
drainage system