| 混凝土检查井施工要求 |
| 添加时间：2019/2/16 15:06:35 浏览次数： |
| 混凝土检查井施工要求 Construction Requirements for Concrete Inspection Well 1、基础做法：井底应夯实，密实度95%以上，铺设10公分碎石或c15垫层。 1. Basic practice: The bottom of the well should be compacted, with a compactness of more than 95%, and 10 cm gravel or C15 cushion should be laid. 2、井筒连接方式：采用企口式，1:2防水砂浆座浆。 2. Wellbore connection mode: enterprise-mouth type, 1:2 waterproof mortar base slurry. 3、检查井与管道连接方式：不同管材分别处理，水泥管应凿毛。用1:2膨胀砂浆处理。其他管材按照管材要求处理。 3. Connection mode between inspection well and pipeline: different pipe materials should be treated separately, and cement pipe should be chiseled. Treated with 1:2 expansive mortar. Other pipes shall be treated according to the requirements of pipes. 混凝土检查井施工 [1] 中，还有很多需要注意的地方，大家在安装过程中要多多注意！ In the construction of concrete inspection wells [1], there are still many points needing attention. We should pay more attention in the process of installation. |
| 上一页 检查井通病原因分析 |
| 下一页 塑料排水检查井施工技术 |
Copyright © 技术支持：遨游网络